Product parameters
Voltage: 4.5V
Power: 0.6W
Max lumen: 35LM
CCT: 4000K
LED model: 2835
LED quantity: 11PCS(White light + RGB light)
Shell material: ABS+PC
Power supply: 3 AAA batteries(Not include)
Control method: Manual + IR remote control
Remote control distance: 3 M

Features
WIDELY APPLICAITON: This LED Under Cabinet Light Kit has 11pcs high-quality 2835 LEDs, very bright with a service life of up to 50,000 hours. You can use the lights as night lights, cabinets, wardrobes, kitchens, bedrooms, stairs, cupboards, corridor, counter, etc. And yit also can be as the colorful atmosphere lamp, as the showcase lights, wall decoration lights, etc.
RGB COLOR CHANGING: The LEDs are coverd by the good-quality PC lamp shades, making the light warm and soft, without glare and flash. In addition to the warm white light, we also add RGB light modes to the cupboard lights, namely red, green, blue and various mixed colors, so that this product can also act as an atmosphere lamp while achieving the lighting function.
10 LEVEL BRIGHTNESS + TIMING FUNCTION: You can press the brightness +/- key on the remote control to adjust the cabinet lights brightness increases /decreases by 10% and the initial brightness is 10%. If you do not want your battery capacity to be consumed too quickly, it is recommended that you control the brightness to 10% to 40%. The timing function has10/30/60/120 minutes, different color change effects at different timing times.
REMOTE CONTROL & MANUAL COMBO CONTROL: You can use the remote control to operate this cabinet lights, such as turning on/off the light, adjusting the brightness and timing, etc. You can also switch the lights by short pressing the lampshade or adjust the brightness by long pressing the lampshade. It is more convenient than other seller's products that switching the light manually.
EASY TO USE AND REPLACE:  It is more convenient to use. Use the double-sided adhesive tape to stick the lamp to any smooth surface you want to fix (note waterproof and fireproof). When the light brightness starts to weaken or the remote control is not sensitive enough, you can remove the product and change the new AAA alkaline battery. Wireless design makes the lamp more flexible and applicable.

NOTE:
1.When the battery is installed or replaced, the bottom cover must be turned counterclockwise to open, turned clockwise until the sticking point is on the same line to close up (you can also refer to the picture on our link).
2.Do not soak in water, do not disassemble anyhow.
3.Please remove the transparent insulating sheet from the remote control when using it for the first time and aim to our product, if the battery power is enough, you may enjoy a 3 meters remote control distance.

Package include
6x Cabinet light
2x Remote
6x Adhesive patches